Galion 100 & PLD Series
100U
The Galion 100U Dump Body is engineered for exceptional performance on 9900 – 19500 GVWR cab/chassis. Constructed with all 10-gauge high tensile steel, the 100U features robust floors, tailgate, head sheets, and sides. Its design includes front corner posts, two intermediate side braces, full-depth rear corner posts, and boxed “material shedding” top rails for enhanced durability.
- Dimensions: Available in inside lengths from 8′ to 11′-6″, with an 84″ inside width. Choose between 13″ sides with a 19″ gate or 18″ sides with a 24″ gate.
- Sides: 10-gauge high tensile steel with material shedding boxed top rails, full-depth 10″ rear corner posts, front side brace, and two intermediate vertical side braces.
- Floor: 10-gauge high tensile steel with a 2″ radius floor-to-side transition.
- Front Bulkhead: 10-gauge high tensile steel construction with a two-bend top flange.
- Tailgate: Heavy-duty cast quick-release top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Stacked design utilizing 6″ structural longitudinals gusseted to 3″ structural channel crossmembers on 12″ centers, lubricated front and rear cross shaft, and full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Aluminum construction
- Coal door in gate
- Fold-down sides
- Bolt-on spreader apron
- Cab protectors (with or without window)
- Mailhot hoist option
130U
The Galion 130U Dump Body is designed for superior performance on 9900 – 19500 GVWR cab/chassis. This model features a 3/16″ high tensile steel floor, 10-gauge high tensile steel tailgate, head sheets, and sides. Its robust construction includes front corner posts, smooth sides, full-depth rear corner posts, a crossmemberless understructure, and boxed “material-shedding” top rails.
- Dimensions: Available in inside lengths from 8′ to 11′-6″, with an 84″ inside width. Options include 13″ sides with a 19″ gate or 18″ sides with a 24″ gate.
- Sides: 10-gauge high tensile steel with material-shedding boxed top rails, full-depth 10″ rear corner posts, and a low-drag smooth design.
- Floor: 3/16″ high tensile steel with a 2″ formed-in-place floor-to-side radius.
- Front Bulkhead: 10-gauge high tensile steel construction with a two-bend top flange.
- Tailgate: 10-gauge high tensile steel, single-panel design with full perimeter box bracing, double-acting design with long chains, and two sets of banjo eyes.
- Tailgate Hardware: Heavy-duty cast quick-release top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Crossmemberless design using 3/16″ x 100K steel formed into 5″ trapezoid longbeams, lubricated front and rear cross shafts, and a full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Stainless steel construction
- Coal door in gate
- Additional light holes
- LED lighting instead of incandescent
- Sleek or integral cab protector (with or without window)
- Bolt-on spreader apron
- Fold-down sides
- Pressed “V” side brace
- Vertical boxed bracing for sides and tailgate
PLD
The Galion PLD Dump Body is engineered for superior service on 12000 – 26000 GVWR cab/chassis. Constructed with all 10-gauge high tensile steel, the PLD features robust floors, tailgate, head sheets, and single V-brace sides. It includes 10″ full-depth rear corner posts and boxed “material-shedding” top rails for enhanced durability.
- Dimensions: Available with an inside width of 84″ and lengths of 12′, 14′, and 16′. Features 18″ sides, a 42″ front, and a 24″ gate.
- Sides: 10-gauge high tensile steel with horizontal pressed V-brace, material-shedding boxed top rails, full-depth 10″ rear corner posts, and 6″ front and rear board extension pockets. Drop sides do not have pressed V-brace.
- Floor: 10-gauge high tensile steel with a 2″ radius floor-to-side transition.
- Front Bulkhead: 10-gauge high tensile steel construction with a two-bend top flange and horizontal V-brace.
- Tailgate: 10-gauge high tensile steel with full perimeter box bracing, two intermediate vertical box braces, double-acting design with long chains, and two sets of banjo eyes.
- Tailgate Hardware: Heavy-duty cast quick-release top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Stacked design utilizing 7″ structural longitudinals gusseted to 3″ structural channel crossmembers on 12″ centers, lubricated front and rear cross shafts, and a full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Aluminum construction
- Stainless steel construction
- Coal door in gate
- Fold-down sides
- Sleek cab protector
- Integral cab protector
- Bolt-on spreader apron
Financing Available
Investing in new turf, truck, or snow and ice equipment is a major decision for any business, which is why Mid-State Truck Equipment partners with Sheffield Financial and Click Lease to make getting the right equipment easier on your budget. Whether you're outfitting a single work truck or expanding an entire fleet, flexible financing and leasing options let you acquire the equipment you need now while preserving cash flow for the rest of your operation. With competitive rates, fast approvals, and terms tailored to commercial and municipal customers alike, financing through MTE means you can get equipped today and pay over time, all while working with the trusted local team that's kept Central Indiana running since 1981.
– Lee D.
Get In Touch
Monday Thru Friday
7:30 am to 5:00 pm
Saturday
8:00 am to Noon
Emergency Hours
We keep our Service Center open as needed when the snow is falling.
Send A Message