400 & 500 Series
433U
The Galion 433U Dump Body is specifically designed for heavy-duty hauling requirements, making it ideal for construction work, aggregate hauling, and bucket loading. Built with tough high tensile stainless steel, the 433U is engineered to outlast and outperform other dump bodies. It is recommended for single axle underbody hoist applications.
- Dimensions: Available in 9′ and 10′ inside lengths, 86″ inside width, with 26″ sides and 32″ or 36″ ends.
- Sides: 10-gauge stainless steel with material-shedding boxed top rails, sloping bottom rails, 15″ wide full-depth rear corner posts, one intermediate, formed-in-place horizontal “V” brace, 10″ front and rear board extension pockets, and full-length tarp rails. Includes grip strut walkrail on both sides.
- Floor: 3/16″ AR 450 Hardox with a 9″ weld-in radius.
- Front Bulkhead: 10-gauge stainless steel construction with a two-bend top flange and one formed-in-place intermediate “V” brace.
- Tailgate: 10-gauge stainless steel, 3-panel design with full perimeter box bracing, two intermediate vertical braces, one intermediate horizontal brace, double-acting design with long chains, two sets of banjo eyes, and a full-width lower tailgate pin.
- Tailgate Hardware: Heavy-duty cast stainless steel “tarp friendly” top hardware and stainless lower hardware with a stainless manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Crossmemberless design using 3/16″ x 100K formed 10″ trapezoidal longbeams, lubricated front and rear cross shafts, and a full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Coal door in gate
- Air tailgate
- Additional light holes
- Mailhot hoist option
- Weld-on or bolt-on spreader apron
- LED lighting instead of incandescent
- Designed for underbody or front mount hoists
- Other lengths and side and end heights available
- Other gauges, material types, and understructures available
- Various cab protectors
453U
The Galion 453U Dump Body is a heavy-duty stainless steel body designed for aggregate hauling, spreading, and snow removal applications. This robust body features full-depth rear corner posts and bolster, a 6-panel tailgate, and continuous weld throughout for enhanced durability.
- Dimensions: Available in a 10′ inside length, 84″ inside width, with 30″ sides and 40″ ends.
- Sides: 7-gauge stainless steel with material-shedding boxed top rails, full-depth 15″ rear corner posts, three intermediate vertical side braces, 10″ front and rear board extension pockets, and full-length tarp rails.
- Floor: 3/16″ AR450 Hardox with a 2″ floor-to-side radius.
- Front Bulkhead: 7-gauge stainless steel construction with a two-bend top flange and one formed-in-place intermediate “V” brace.
- Tailgate: 7-gauge stainless steel, 6-panel design with full perimeter box bracing, two intermediate vertical braces, one intermediate horizontal brace, double-acting design with long chains, two sets of banjo eyes, and a full-width lower tailgate pin.
- Tailgate Hardware: Heavy-duty cast “tarp friendly” top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear posts. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: 10″ formed trapezoid longitudinals, 3/16″, 100K PSI yield, lubricated front and rear cross shafts, and a 3/16″ full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- 9′ body length
- Heated body
- Coal door in gate
- Air tailgate
- Additional light holes
- Bolt-on spreader apron
- LED lighting instead of incandescent
- Cast HD quick-release top hardware
- Various side and end heights available
- Various cab protectors
- Formed stainless trapezoid longsills
- Stainless steel construction
533U
The Galion 533U Dump Body is designed for over-the-highway aggregate hauling, construction, batching work, and spreading stone, sand, gravel, and other aggregates. This model features a lighter crossmemberless construction, making it an excellent choice for medium to heavy-duty work. The 533U series body uses high tensile stainless steel throughout for superior resistance to abrasion.
- Dimensions: Available in 11′ through 17′ inside lengths, in 1′ increments, with an 84″ inside width. The 11′ and 12′ bodies come with 33″ sides and 43″ ends, while the 13′ through 17′ bodies are available with 43″ sides and 53″ ends or 48″ sides and 56″ ends.
- Sides: 10-gauge stainless steel with material-shedding boxed top rails, full-depth 15″ rear corner posts, formed “V” horizontal bracing, 10″ front and rear board extension pockets, and full-length tarp rails.
- Floor: 3/16″ AR 450 Hardox steel with a 2″ floor-to-side radius.
- Front Bulkhead: 10-gauge stainless steel construction with a two-bend top flange and two vertical structural angle reinforcements.
- Tailgate: 7-gauge stainless steel, 6-panel design with full perimeter box bracing, two intermediate vertical braces, one intermediate horizontal brace, and a full-width lower tailgate pin.
- Tailgate Hardware: Heavy-duty all stainless cast “tarp friendly” top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Crossmemberless design using 3/16″ x 100K formed 11″ trapezoidal longbeams, lubricated front and rear cross shafts, and a full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Nine-panel tailgate
- Coal door in gate
- Air high lift tailgate
- Air tailgate
- Asphalt package
- Additional light holes
- Bolt-on spreader apron
- Two-way barn door tailgate (hardware and hinges not stainless)
- Weld-on horizontal side braces
- LED lighting instead of incandescent
- Various cab protectors (sleek, widths to 90″, long version)
553
The Galion 553U Dump Body is designed for over-the-highway aggregate hauling, construction, batching work, and spreading stone, sand, gravel, and other aggregates. This model features a lighter crossmemberless construction, making it an excellent choice for medium to heavy-duty work. The 553U series body uses high tensile stainless steel throughout for superior resistance to abrasion.
- Dimensions: Available in 11′ through 17′ inside lengths, in 1′ increments, with an 84″ inside width. The 11′ and 12′ bodies come with 33″ sides and 43″ ends, while the 13′ through 17′ bodies are available with 43″ sides and 53″ ends or 48″ sides and 56″ ends.
- Sides: 10-gauge stainless steel with material-shedding boxed top rails, full-depth 15″ rear corner posts, pressed “V” braces, 10″ front and rear board extension pockets, and full-length tarp rails.
- Floor: 3/16″ AR 450 Hardox steel with a 2″ floor-to-side radius.
- Front Bulkhead: 10-gauge stainless steel construction with a two-bend top flange and two vertical structural angle reinforcements.
- Tailgate: 7-gauge stainless steel, 6-panel design with full perimeter box bracing, two intermediate vertical braces, one intermediate horizontal brace, and a full-width lower tailgate pin.
- Tailgate Hardware: Heavy-duty all stainless cast “tarp friendly” top hardware and cast overshot lower hardware with a manual release handle.
- Lighting: Meets FMVSS108 requirements with oval stop/tail/turn lights recessed in the rear post. All lighting is recessed, shock-mounted, and comes with a factory wiring harness.
- Understructure: Crossmemberless design using 3/16″ x 100K formed 10″ trapezoidal longbeams, lubricated front and rear cross shafts, and a full-width rear bolster.
- Safety Features: Includes a “body up” warning light and OSHA-required backup alarm.
- Finish: Glossy black thermoset powder coating over a thermoset zinc powder coat primer.
- Nine-panel tailgate
- Coal door in gate
- Air high lift tailgate
- Air tailgate
- Asphalt package
- Additional light holes
- Bolt-on spreader apron
- Two-way barn door tailgate (hardware and hinges not stainless)
- Weld-on horizontal and/or vertical side braces
- LED lighting instead of incandescent
- Various cab protectors (sleek, widths to 90″, long version)
- Smooth side design with two horizontal “V” braces instead of vertical braces
Financing Available
“Since launching my construction business a few years ago, and keeping everything organized and readily accessible was a constant challenge. That all changed when I discovered Mid-State Truck Equipment. Their knowledgeable staff helped me choose the perfect toolbox and bed liner for my truck. The installation was quick and professional. Mid-State Truck Equipment’s solutions have helped me streamline my operations and focus on delivering exceptional service to my clients.”
– Lee D.
Get In Touch
Monday Thru Friday
7:30 am to 5:00 pm
Saturday
8:00 am to Noon
Emergency Hours
We keep our Service Center open as needed when the snow is falling.